Flying Flex Industrial And Hydraulic Hoses


(File  size: 7.72)

 
Home » Products »

Flying Flex Industrial and Hydraulic Hoses

SAE 100 R1AT / EN 853 1SN

Application: Hydraulic System With Petroleum or Water Base Fluid & For Fuel and Lubricating Oils.

Lining: Black Oil Resistant Synthetic Rubber Compound.
Reinforcement: One High Tensile Brass Coated Steel Wire Braid.
Cover: Abrasion, Ozone and Weather Resistant Synthetic Rubber Compound.
Temp. Range: -40°C. To 100°C. (intermittent Use Upto 125°C.)
Impulse: 1,50,000 Cycles
Options: Robust - High Abrasion resistant Cover
 
 
 

SAE100 R2 / AT EN 853 2SN

Application: Hydraulic System With Petroleum Or Water Base Fluid & For Fuel And Lubricating Oils.
Lining: Black Oil Resistant Synthetic Rubber Compound.
Reinforcement: Two High Tensile Brass Coated Steel Wire Braids.
Cover: Abrasion, Ozone and Weather Resistant Synthetic Rubber Compound.
Temp. Range: -40°C. To 100°C. (intermittent Use upto 125°C.)
Impulse: 2,00,000 Cycles
Options: Robust - High Abrasion resistant Cover
 
 
 

SAE 100 R3 / EN 854 R3

Application: Hydraulic System With Petroleum Or Water Base Fluid & For Fuel and Lubricating Oils.
Lining: Oil Resistant Synthetic Rubber Compound.
Reinforcement:Two Braids of High Tenacity Textile Yarn.
Cover: Synthetic Rubber Compound widh Abrasion, Ozone and Weather Resistance.
Temp. Range: -40°C. To 100°C.
Impulse: 2,00,000 Cycles
Options: Robust - High Abrasion resistant Cover
 
 
 

SAE 100 R6C & R6R / EN 854 R 6

Application: Low Pressure Hydraulic Oils, Fuel, Lubricating Oil, Anti-freeze Solution and Water.
Lining: Black Oil Resistant Synthetic Rubber Compound.
Reinforcement: One Braid Of Suitable Textile Yarn.
Cover: Synthetic Rubber Compound with Abrasion, Ozone and Weather Resistance.
Temp. Range: -40°C. To 100°Cc. (Intermittent Use Upto 110°C.)
Impulse: Robust - High Abrasion resistant Cover
 
 
 

AIR / WATER HOSE

Application: Low Pressure Application For Compression and Delivery.
Lining: Modified Natural Rubber Compound
Reinforcement: One I Two High Tencity Synthetic Yarn Braids.
Cover: Modified Natural Rubber Compound with Good Ageing and Abrasion Properties
Standard: Exceeds IS 444 & 446 (type - I)
 
 
 

PNEUMATIC TOOL HOSE

Application: For use in Compressor in Industry, Construction, Shipyard and Wagon in tough Operating Conditions.
Lining: Modified Natural Rubber Compound.
Reinforcement: One I Two High Tencity Synthetic Yarn Braids
Cover: Modified Natural Rubber Compound Resistant To Abrasion and Ageing.
Standard: Exceeds IS 446 (type - II)
 
 
 

ROCK DRILL HOSE

Application: Used for Extra Heavy Duty, High Pressure Pneumatic Application in Industry, Construction,
Mines, Drilling and Quarries in Most Severe Service Conditions.

Lining: Heat and Oil Mist Resistant Rubber Compound.
Reinforcement: One High Tensile Brass Coated Steel Wire Braid.
Cover: Abrasion & Oil Resistant Synthetic Rubber Compound.
Temp. Range: -34°C To + 100°C.
Standard:Exceeds IS 2446 (Type - Ill)
 
 
 

CHEMICAL HOSE

Application:Designed for a Wide Range of Chemicals, Acids, Alkalies & Alcoholic Materials.

Lining: Synthetic Rubber Compound.
Reinforcement: One High Tensile Brass Coated Steel Wire Braid.
Cover: Synthetic Rubber Compound with Heat, Abrasion, Ageing, Weather & Ozone Resistance.
Standard:Super Exceeds IS 7654 ( Type-11 ) Specification
 
 
 

CAR WASH HOSE (SINGLE WIRE)

Application: For Use In Service Station for Water Jetting.
Lining: Natural and Synthetic Rubber Blend.
Reinforcement:
Rcw 1 : One High Tensile Brass Coated Steel Wire Braid
Rcw 2 : Two High Tensile Brass Coated Steel Wire Braid
Cover: Synthetic Rubber Compound Resistant To Ozone and Oil with Excellent Abrasion and Ageing Properties.
Special: Extra High Burst Pressure For Safety
Standard: Super Exceeds IS 7654 ( Type-II ) Specification
 
 
 

SAND / SHOT BLAST HOSE

Application: Used for Cleaning / Blasting in Casting Metal, Stone, Concrete Surface With Wet / dry Sand or Other Abrasive Material.
Lining: Extra Thick Seamless Natural Rubber Lining with High Abrasion Resistance & Resilience.
Reinforcement:

Suitably Braided With Synthetic Yarn and Two Tin Coated Copper Wire Laid Spirally In Opposite Direction To Dissipate Static Charge.

Cover: Highly Abrasion Resistant Modified Natural Rubber Compound With Excellent Ageing Properties.
Standard: Exceeds IS 5894 ( Type-II )
 
 
 

STEAM HOSE (SINGLE WIRE) Exceeds IS 10655: 1999 (Type- 2 & 3)

Application: Steam at High Temperature.
Lining: Steam & Heat Resistant Rubber Compound.
Reinforcement: One/ Two High Tensile Brass Coated Steel Wire Braid/ Braids.
Cover: Rubber Compound Resistant to Heat, Abrasion & Weather
Temp. Range: Upto 205°C
Special Feature : High Safety Ratio with High Burst Pressure
 
 
 

CARBON FREE HOSE (R CF)

Application: For use in induction furnace as cable coolant and non- conductive application.
Lining: White Synthetic Rubber Compound.

Reinforcement: One I Two High Tencity Heat Resistant Synthetic Yarn Braid I Braids.

Cover: Green Rubber Compound with Abrasion, Weather, Heat Resistant and Ageing Properties.
 
-->